PDW-680 Firmware Notices

Service Centre installation required.

Important notice

All PDW-680 firmware upgrades require a mandatory post-adjustment which can only be performed by a qualified engineer. Please contact your Service Centre.

Overview: PDW-680 V3.20

Improvements

V3.20 includes the following improvements:

  • Addition of menu to select a security level
  • Add the menu to delete all essence marks
  • PDW-HD1550, PDW-750, and PDW-850 as the destination of Direct FTP

Overview: PDW-680 V1.06

Improvements

V1.06 includes the following improvement:

・Improves the camcorder behaviour when a physically damaged disc is inserted in the slot.

Overview: PDW-680 V1.05

Improvements

V1.05 includes the following improvements.

Function Improvement

1.) Improvement of Disc Servo firmware to correct “DRV ADJ err” or “DI read err” error message appearance.

Compatibility Information

1.) If this model is used in combination with PDW-U1 or PDW-U2 ,upgrade XDCAM drive software to v2.3.2 or V3.1.1 or higher respectively.

2.) Windows & Mac FAM Drivers must be upgraded to V2.3.0 or higher beforehand.

3.) XDCAM BROWSER must be upgraded to V1.3 beforehand.

4.) CONTENT BROWSER must be upgraded to V1.1 or above beforehand

5.) If PDW-700, PDW-F800, PDW-HD1500 or PDW-F1600 is used in combination with this model, it must first be upgraded to V1.71 or higher.

IMPORTANT NOTICE

This upgrade requires a mandatory adjustment which can only be performed by a qualified engineer.