Inputs/outputs
Serial digital input: SDI IN connector (BNC type) (1), 0.8 Vp-p, 75 Ohm, 4:2:2 component serial digital signal, conforming to SMPTE-259M-C, 270 Mb/s.
Reference input: REF IN connector (BNC type) (1), 0.3 Vp-p ±10%, 75 Ohm, black burst signal
Digital input return loss: 15 dB or more (5 MHz to 270 MHz)
Serial digital output: Active loop-through output connector (BNC type) (1), 0.8 Vp-p, 75 Ohm, 525/625 component serial digital signal, conforming to SMPTE-259M-C, 270 Mb/s
Analog video output: ANALOG OUT connectors (BNC type) (4), NTSC/PAL composite analog video signal, 1.0 Vp-p, 75 Ohm
Reference output: Passive loop-through output connector (BNC type) (1), 0.3 Vp-p ±10%, 75 Ohm, black burst signal
Digital output return loss: 15 dB or more (5 MHz to 270 MHz)
Cable length: 200 m max. (with Belden 8281, Fujikura 5C2V or equivalent coaxial cable)
Channel coding: Scrambled NRZI
Video characteristics
Sampling frequency: 27 MHz
Internal processing: 12 bits
K factor (2T pulse): 1% or less
Signal-to-noise ratio: 60 dB or more (using Flat Field)
Y/C delay: ±10 ns or less
Processing delay: 4 µs (NTSC)/7.5 µs (PAL)
Phase adjustment range: Line: -2 H, -1 H, ±0 H, +1 H
INPUT Lock mode: 0.1 to 8.5 µs (NTSC), 0.1 to 7.0 µs (PAL)
External REF mode: -4.2 to +4.2 µs (35 ns steps NTSC), -3.5 to +3.5 µs (28 ns steps PAL),
Test signal: 75% color bars with 100% white
General
Power requirement: +5 V DC: 1.2 A (supplied from PFV-L Series Interface Unit)
Operating temperature: +5 °C to +40 °C (+41 °F to +104 °F)
Storage temperature: -20 °C to +60 °C (-4 °F to +140 °F)
Operating humidity: 10% to 90% (no condensation)
Dimensions
: Board 77 x 267 mm (3 1/8 x 10 3/4 inches) (h/w)
Connector panel 33 x 85 mm (1 5/16 x 3 3/8 inches) (w/h)
Mass
: Board Approx. 150 g (5 oz)
Connector panel Approx. 100 g (4 oz)