DWR-R03D (DWRR03D)

DWX Series 2-channel digital wireless receiver

Where to buy

Overview

Superb audio quality and stable operation in a wide range of environments
The third generation of Sony's acclaimed DWX series, this high performance digital wireless receiver is an ideal choice for live sound applications including theatre and concerts, as well as studio based TV production and EFP.

The two-channel 1U rack-mountable wireless receiver features Sony's advanced digital audio processing, encryption and RF transmission technologies to assure secure, stable transmission and reception of very high quality audio with low latency.

The DWR-R03D is ideal for use in large-scale multi-channel productions, supporting up to 21 simultaneous channels per 8MHz TV band or up to 16 simultaneous channels per 6MHz TV band.

Support for the Dante® audio-over-IP standard enables networked multi-channel operation.

The DWR-R03D is compatible with Sony Wireless Studio control software for PC (Ver 5.0 or later), allowing flexible remote operation. Remote control of up to 82 transmitters is possible using the Cross Remote™ function combined with the RMU-01 remote control unit (available separately).

Features

Very high quality wireless audio
Advanced Sony codec design assures superb audio quality, with a high dynamic range of more than 106 dB, plus a wide frequency response of 20 Hz - 22 kHz and excellent transient response.
Low-latency audio
Advanced Sony codec design reduces audio latency to as little as 1.2msec*

*DWT-B03R and DWR-R03D total delay with codec mode2 and analog output
Dante® interface for audio-over-IP networking
The DWR-R03D is compatible with the Dante digital audio-over-IP networking standard for professional AV and sound reinforcement environments. Allows headphone monitoring with other receivers in Dante network. Two Dante ports support redundant network operation.
Reliable transmission
X-Dimension Diversity™ technology, high dynamic range RF circuits and 4 antenna diversity reception system enhance RF transmission stability.
Automatic frequency change by Cross Remote*
When drop out happens, it changes channels of both transmitter and receiver applying scan results.

*Available by firmware update (in FY2018)
Easy, versatile remote control
The DWR-R03D is compatible with Sony's Wireless Studio control software for PC (Version 5.0 or later) and up to 82 transmitters can be controlled using the Cross Remote™ function and RMU-01 remote control unit (available separately).
244MHz* wideband
Contributes to the reduction of equipment and burden of maintenance.
High density multi-channel operation
Ideal for large-scale productions, the DWR-R03D supports high-density simultaneous multi-channel operation: 375kHz spacing accommodates up to 21 channels per 8MHz TV band or up to 16 simultaneous channels per 6MHz TV band.
Channel swap*
Channel swap function enables interchange of audio output 1 and 2.
*Available by firmware update (in FY 2018)
AES 256bit encryption
For secure encrypted transmission.
AC power cascade
AC power output simplifies implementation of multiple receivers in large multi-channel applications.
Dual OLED displays
Easy-to-read dual OLED displays give visual confirmation of operating information and status for each channel.
User setting memory
Settings can be easily stored to the memory of DWR-R03D.
Setting lock
Receiver settings can be locked to prevent accidental operation during performance.
Transmitter/receiver identify function
Paired transmitters/receivers are identified by blinking display.
Switchable analogue (balanced) and AES/EBU digital audio sub output
Adjustable audio output level (1dB step)

Specifications

Specifications
Wireless Interface
WiDIF-HP
Oscillator Type
Crystal-controlled PLL Synthesizer
Reception Type
True diversity
Circuit system
Double Superheterodyne
Antenna Type
Detachable
Antenna Connector
2 diversity mode: Input BNC-R, 50 Ω (x2), Cascaded Output BNC-R, 50 Ω (x2)
4 diversity mode: Input BNC-R, 50 Ω (x4)
Carrier Frequencies - UC7
470.125 MHz to 607.875 MHz, 614.125 MHz to 615.875 MHz, 25 kHz steps
Carrier Frequencies - CEZ
470.025 MHz to 714.000 MHz, 25 kHz steps
Carrier Frequencies - J
W: 470.150 MHz to 713.850 MHz, 25 kHz steps
G: 638.025 MHz to 713.850 MHz, 1240.150 MHz to 1251.825 MHz, 1253.175 MHz to 1259.850 MHz, 25 kHz steps, 806.125 MHz to 809.750 MHz, 125 kHz steps
Frequency Response
20Hz to 22kHz (typical)
Dynamic Range
106 dB or more typical (A-weighted, T.H.D=1%)
Distortion (T.H.D)
MODE1, MODE2: 0.03% or less, MODE3: 0.3% or less
Audio Delay
MODE1; 1.9 msec (total: 3.1*/3.4**msec) (Analog output), 1.9 msec (total: 3.1*/3.4**msec) (Digital output)
MODE2: 0.5 msec (total: 1.2*/1.5**msec) (Analog output), 1.5 msec (total: 2.2*/2.5**msec) (Digital output)
MODE3: 1.9 msec (total: 3.7*/4.0**msec) (Analog output), 2.8 msec (total: 4.6*/4.9**msec) (Digital output)
*with DWT-B03R ** with other transmitters
Analog Output
BAL: XLR-3-32 (male) (×Main 2, Sub 2), Output level (0 dBu = 0.775 Vrms)
Main BAL: +24 dBu maximum/–58 dBu to -12 dBu (1dB step adjustable) reference
Sub BAL: +24 dBu maximum/–12 dBu reference
Digital Output
XLR-3-32 (male), 110 Ω (×2) / BNC-R, 75 Ω (×1), Reference output level: –36 dBFs
Headphone Output
φ6.3 mm (1/4 inch) stereo jack
WORD SYNC IN/OUT connectors
Input connector: BNC-R with a 75 Ω termination switch, Output connector: BNC-R, External Word Sync: 32 kHz to 96 kHz
Wireless Remote Control
Cross Remote (2.4 GHz IEEE802.15.4 compliant)
LAN Connector
RJ-45 modular jack 1000BASE-T: IEEE802.3ab compliant (x 2)
Display
OLED (x2)
Power Requirements
AC: 100 to 240 V
Operating Temperature
0°C to 50°C / 32°F to 122°F
Storage/Transport Temperature
-20°C to +60°C / -4°F to +140°F
Dimensions
Approx. 482×44×335mm
Mass
Approx. 3.9 kg
Supplied Accessories
Supplied Accessories
Whip antenna (2)
AC power cord (1)
AC cascade cord (1)
Foot (4)
Operating Instructions (CD-ROM) (1)