ECM-166BMP (ECM166BMP)

Omni-directional lavalier Electret condenser microphone

Where to buy

Overview

Black coloured omni-directional electret condenser lavalier microphone supplied with a 3-pole locking mini-plug for use with the bodypack transmitter included in UWP series
  • The lavalier microphone supplied with the UWP package is available as an individual microphone
  • Omni-directional, electret condenser microphone
  • Reasonably priced lavalier microphone, ideal for ENG and EFP uses

Specifications

Audio Section
Capsule Type
Electret Condenser
Frequency Response
100 Hz to 10 kHz
Directivity
Uni-directional
Sensitivity *[1]
-45 dB (5.6 mV) ±3 dB
Output Impedance *[2]
2.5kΩ±30%, Unbalanced
Dynamic Range
96 dB or more
Signal-to-Noise Ratio *[3]
60 dB or more
Inherent Noise *[4]
34 dB SPL or less
Maximum Input Sound Pressure Level *[5]
130 dB SPL
General Section
Connector
BMP type. Supplied with o3.5 mm, 3-pole mini plug.
Mic Cable
3.9 feet
1.2 m
Power Requirements
DC 1.1 V to 10.0V
Power Consumption
0.4 mA or less
Dimensions *[6]
φ12.7 X 23.8 mm (Mic head)
φ1/2 X 15/16 inches (Mic head)
Mass
Approx. 19.8 g
Approx. 0.7 oz
Supplied Accessories
Urethane type windscreen (1)
Single/horisontal type tie clip (1)
Operating instructions (1)
Notes
Note
*[1] 0 dB = 1 V/Pa, at 1 kHz
*[2] Output impedance at 1 kHz
*[3] A-weighted, 1 kHz, 1 Pa.
*[4] 0dB SPL = 20? Pa.
*[5] 0 dB SPL = 20? Pa.
*[6] The values for dimensions are approximate.