HDW-800P (HDW800P)Discontinued

HD camcorder, offering 2.2 million pixels per colour, HDCAM recording and is switchable between 50i and 25P scanning.


The HDW-800P features an extremely compact and lightweight design, with a robust and reliable construction. The use of three 2.2 million-pixel FIT CCDs, and 12-bit Advanced Digital Signal Processing (ADSP) ensures superb picture quality.

In addition to 12bit ADSP, the HDW-800P also shares a number of other features with the top-of-the-range HDW-F900R. These include 2 HD-SDI outputs, inputs for recording 4 channels of 20-bit AES/EBU digital audio and 4 HyperGamma settings, which allow the cinematographer to precisely optimise the desired 'look' of the acquired image. A choice of either colour or monochrome viewfinder completes the feature set.
Superb High Definition pictures
The HDW-800P acquires pictures in 1080-line resolution, providing an unforgettable High Definition viewing experience for your audience.
Increased marketability of your programmes
HDCAM has achieved an enviable reputation for quality, and programmes shot in HDCAM are accepted by many of the world's most prestigious broadcasters. Shooting in HDCAM opens up new opportunities for international co-production and distribution.
Peace of mind for High Definition post production
Over 31,000 HDCAM VTRs and camcorders are in use worldwide, and the number of post houses equipped with HDCAM grows every day. You can relax in the knowledge that there is an HDCAM facility close by to add the finishing touches to your project.
Easy integration with Standard Definition
Today more and more programme makers are shooting HDCAM, with many of them using existing SD suites for post production. This approach provides many advantages. These include the lower cost associated with SD post production, and the benefit of retaining an exceptionally high quality HDCAM original recording for future distribution opportunities. And even when downconverted to SD, pictures from HDCAM camcorders will look noticeably better than those originated in SD.
Differentiation in a crowded market
The original HDW-750P has built an unrivalled reputation for the production of the very best in quality programming, helping establish HDCAM as the preferred High Definition format worldwide. In today's multi-channel world, shooting with the HDW-800P ensures that your pictures stand out to grab the attention of the viewers.
Ease-of-use for minimum re-training
The latest in a long line of digital camcorders from Sony, the HDW-800P retains the ergonomic design and familiar operation for which Sony camcorders have become renowned. With the HDW-800P, you avoid expensive operational retraining and can generate great pictures from day one.


HAD sensor technology
The HDW-800P uses Power HAD sensor technology incorporating the latest FIT sensor and on-chip lens structure. Three 2/3-inch FIT CCDs each with 2.2 million-pixels provide excellent imaging quality acquiring pictures at 1920 x 1080 CIF (Common Interchange Format) resolution.
12 bit A/D conversion
12 bit A/D conversion and advanced digital signal processing ensures excellent tonal reproduction, for the most demanding applications.
Choice of frame rates
You can shoot pictures in either interlaced or progressive mode. 50i can be selected to acquire interlaced 'TV look' pictures, and 25P can be selected where a 'film look' is required.
TruEye Processing
TruEye virtually eliminates hue distortion, especially in extreme lighting conditions. TruEye processes video data in a similar way to the human eye - processing brightness, hue and saturation. This significantly improves the reproduction of natural skin tones.
Multi Matrix
Multi Matrix provides further in-camera creative control and can be used to match colourimetry during multiple camcorder shoots. It is also effective for manipulating the hue and saturation of specific selected colours within a scene. One example would be to adjust the hue and saturation of a flower petal without changing other colours within the picture.
Auto Trace White
Auto Trace White (ATW) is a feature that automatically adjusts the white balance as lighting conditions change. This is ideal when shooting in rapidly changing lighting conditions (for example, when moving from an indoor to an outdoor location). Conventional Auto White Balance is also available.
Long record duration onto HDCAM cassettes
The HDW-800P records up to 48 minutes onto a small HDCAM cassette.
Dual optical filter wheel
The HDW-800P is equipped with dual optical filter wheels. You can choose from the following Neutral Density (ND) settings: CLEAR, 1/4ND, 1/16ND and 1/64ND, and the following Colour Correction (CC) settings A:Cross, B:3200K, C:4300K and D:6300K.
Optional HD to SD down conversion
The HKDW-702 HD to SD downconverter option can be used with the HDW-800P. SDI or analogue VBS can be output from the camcorder when this option is fitted.
Slow Shutter and Image Inversion
The new HKDW-905R option can be installed into the HDW-800P to add slow shutter capability (up to 64 frames) and image inversion. The slow shutter feature can be used to either boost sensitivity or to enable motion blur to be used as a creative tool. Image inversion allows the camcorder to be used with a wider range of anamorphic and film lenses.
Picture Cache Recording
It's always annoying to miss a great shot, especially when shooting wildlife footage. Picture cache recording provides an additional chance to capture the action even if it occurred before the REC button was pressed. An optional HKDW-703 can be installed into the camcorder to provide this feature. This allows you to capture up to 8 seconds of material immediately before you press the record button.
Time Lapse
The HKDW-703 also provides Time Lapse (Interval) Recording. In MANUAL mode, 1 to 8 frames are recorded each time the REC button is pressed. In AUTO mode, the overall recording time is set (e.g. 10 minutes) along with the playback time on tape (e.g. 10 seconds). Using the picture cache to achieve Time Lapse reduces the mechanical wear to the record mechanism.
More choices for signal output
The HDW-800P is equipped with two HD-SDI outputs as standard, allowing high definition pictures to be monitored directly on-site without the need for an additional adapter. One of these outputs can be switched to standard definition when the camcorder is fitted with an optional HKDW-702 or HKDW-902R board.
Great audio performance
Four channels of digital audio can be input to the HDW-800P via two XLR inputs. Each XLR receives 2 channels of AES/EBU audio data at 20 bit resolution.
Slot-in wireless receiver
You can slot a Sony wireless receiver directly into the chassis of the HDW-800P. This adds wireless receiver functionality without compromising the compact ergonomic design of the camcorder. A Sony WRR-855B can be used.
Rugged and ergonomic design
The design of the HDW-800P is based on years of Sony experience in camera design and provides a high level of mobility and balance to minimise fatigue in all shooting conditions. Combined with the viewfinder, battery, cassette and microphone, the total weight is only 5.4 Kg.


Power Requirements
DC 12 V +5.0 V/-1.0 V
Power Consumption
Approx. 35 W (with 12 V DC supply, when recording, LCD monitor off)
Approx. 9 lb 4 oz (without options)
Approx. 5.9 kg (with VF, Mic, BCT-40HD, BP-GL95)
Approx. 4.2 kg (without options)
Approx. 13 lb (with VF, Mic, BCT-40HD, BP-GL95)
Operating Temperature
32°F to 104°F
0°C to 40°C
Storage Temperature
-4°F to 140°F
-20°C to +60°C
Operating Humidity
25% to 85% (relative humidity)
Continuous Operating Time
Approx. 120 min with BP-GL95 battery (When using an optional HDVF-20A and operating at the normal temperature of 25°C (77°F).)
Dimensions (W x H x D) *[1]
5 x 10 5/8 x 13 1/8 inches
124 x 269 x 332 mm
Camera Section
Pickup Device
3-chip 2/3-inch type IT CCD
Effective Picture Elements
1920 x 1080 (H x V)
Optical System
F1.4 prism system
Lens Mount
2/3-inch 48 bayonet mount
Built-in Filters
A: Cross, B: 3200K, C: 4300K, D: 6300K
1: Clear, 2: 1/4 ND, 3: 1/16 ND, 4: 1/64 ND
Sensitivity (2,000 lx, 89.9% reflectance)
F11 (59.94i), F12 (50i) (typical)
Minimum Illumination
0.08 lx (F1.4 lens, +42 dB gain, 32-frame accumulation)
Smear Level
-135 dB (typical)
Video S/N Ratio
64 dB (Noise suppressor max.)
54 dB (Noise suppressor off)
Modulation Depth
45% or more (at 27.5 MHz)
0.02% or less (excluding distortion due to lens)
Geometric Distortion
None identified (excluding distortion due to lens)
Horizontal Resolution
1,000 TV Lines
Shutter Speed
1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (50i)
1/33, 1/50, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000 sec (25PsF)
1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (59.94i)
Clear Scan
60 Hz to 4300 Hz (59i)
50 Hz to 4700 Hz (50i)
25 Hz to 2300 Hz (at 25PsF format)
Programmable Gain
-6 dB/-3 dB/0 dB/3 dB/6 dB/9 dB/12 dB/18 dB/24 dB/30 dB/36 dB/42 dB
LCD Panel
Pixel resolution: 250,880 pixels
3.5 inches
VTR Section
Recording Format
HDCAM 59.94i/50i/25PsF
Tape Speed
Approx. 96.7 mm/s (59.94i)
Approx. 80.7 mm/s (50i/25PsF)
Recording/Playback Time
48 min (50i/25PsF) with BC-40HD
40 min (59.94i) with BC-40HD
Fast Forward/Rewind Time
Approx. 5 min with BCT-40HD
Recommended Tapes
HDCAM cassette (S) BCT-6HD/12HD/22HD/32HD/40HD
Sampling Frequency
Y: 74.176 MHz (59.94i), 74.25 MHz (50i), Pb/Pr: 37.088 MHz (59.94i), 37.125 MHz (50i)
10 bits/sample (8 bits sample for compression processing)
Channel Coding
Coefficient recording system
Error Correction
Reed-Solomon code
Error Concealment
Adaptive three dimensional
Genlock Input
BNC (x1), 1.0 Vp-p, 75 Ω, unbalanced
Timecode Input
BNC (x1), 0.5 V to 18 Vp-p, 10 kΩ
Audio Input (CH1/CH2)
XLR-type 3-pin (female) (x2), -60 dBu/+4 dBu/AES/EBU (0 dBu = 0.775 Vrms)
Mic Input
XLR-type 5-pin (female) (x1), -50 dBu (LPF ON)
Test Output
BNC (x1), VBS/Y (component): 1.0 Vp-p, 75 Ω, unbalanced
HD-SDI Output
BNC (x1), 0.8 Vp-p, unbalanced
AUDIO Output
XLR-type 5-pin (male) (x1), 0 dBm
TC Output
BNC (x1), 1.0 Vp-p, 75 Ω
Earphone Output
Mini jack (x2), 8 Ω, -∞ dBs to -18 dBs variable
DC Input
XLR-type 4-pin (male) (x1), DC 11 V to 17 V
DC Output
4-pin (x1), DC 11 V to 17 V, Max. 0.5 A
12-pin (x1), DC 11 V to 17 V, Max. 0.7 A
8-pin (x1)
2-pin (x1)
Supplied Accessories
Supplied Accessories
Shoulder strap (1)
Operation manual (1)
*[1] The values for dimensions are approximate.