Display System
Projection system
Display device
SXRD 0.74" x 3
Display device - Number of pixels
4096 x 2160 x 3 pixels
Projection lens - Zoom
Powered (Approx. x1.6)
Projection lens - Focus
Powered
Projection lens - Corner correction adjustment
Powered
Projection image size
66" to 147"
Color Light output
2,000 lm
Accepted digital signals*
VGA, SVGA, XGA, WXGA(1280x768), Quad-VGA, SXGA, SXGA+, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p, 3840x2160/24p, 3840x2160/25p, 3840x2160/30p, 3840x2160/50p**, 3840x2160/60p**, 4096x2160/24p, 4096x2160/25p, 4096x2160/30p, 4096x2160/50p**, 4096 x 2160/60p**
*60p,30p,24p include 59.94/60Hz, 29.97Hz/30Hz, 23.98Hz/24Hz
**YCbCr 4:2:0 / 8bit format signal
Audio - Power output
40W + 40W (at 8 Ω)
Inputs / Outputs ((Video/Audio/Control) - Supported format
LPCM 2CH (up to 48 kHz)
Inputs / Outputs ((Video/Audio/Control) - HDMI Inputs
4
Inputs / Outputs ((Video/Audio/Control) - Speaker terminals
2
Inputs / Outputs ((Video/Audio/Control) - REMOTE
RS-232C, D-sub 9-pin
Inputs / Outputs ((Video/Audio/Control) - LAN
RJ45, 10BASE-T/100BASE-TX
Inputs / Outputs ((Video/Audio/Control) - IR IN
Mini Jack
Inputs / Outputs ((Video/Audio/Control) - USB
TypeA, DC 5 V, Max. 500 mA
Ventilation - In / Ex
Front, Bottom surface / Front
Operating temperature / Operating humidity
41°F to 95°F (5℃ to 35℃) / 35% to 85% (no condensation)
Storage temperature / Storage humidity
-4°F to +140°F (-20℃ to +60℃) / 10% to 90% (no condensation)
Power requirements
AC 100V to 240V, 50/60 Hz
Maximum power consumption - 100V-120V
520 W
Power consumption
Standby: 0.4 W (when "Remote Start" is set to "Off")
Networked Standby: 0.6 (LAN) (when "Remote Start" is set to "On") When a LAN Terminal is not connected, it becomes a low power consumption mode (0.5W).
Standby mode/Networked standby mode activated
After about 10 minutes
Exterior material
Alminum / Steel
Dimensions (WxHxD)
43 3/8 x 10 1/2 x 21 1/8 inches (1100 x 265 x 535 mm)
Mass
Approx. 113 lb 8.6 oz (51.5 kg)
Features
Picture Position Memory
Reality Creation
TRILUMINOS™ display
3D Format Support with RF 3D Transmitter
Supplied accessories
Remote control (1)
Size AA (R6) manganese batteries (2)
AC power cord (1)
Plug holder (1)
Bottom cover (front, large) (1)
Bottom cover (front, small) (1)
Bottom cover (side) (2)
Terminal door (1)
Adjustment tool (1)
Operating Instructions (1)
Warranty card (1)
Optional accessories - Active 3D Glasses
TDG-BT500A
Please contact your Sony representative for specific models available in your region.