31-inch 4K TRIMASTER HX™ Professional Master Monitor
It’s the 4K HDR monitor professional colourists have been waiting for. An optimal choice for critical colour grading and CG tasks, the BVM-HX310 offers support for industry‑leading wide colour gamuts including DCI‑P3, ITU‑R BT.2020, S‑Gamut3.cine and S‑Gamut3. With consistent, faithful colour reproduction over the entire luminance range, it’s an ideal partner for cinematography production and post production workflow with Sony’s 4K cinematography cameras.
Note: BVM‑HX310 does not cover the ITU-R BT.2020, S-Gamut/S-Gamut3 and S-Gamut3.cine colour space in full.
Fully realising the advanced performance of the TRIMASTER HX panel, the BVM-HX310 achieves 1,000 nits* of full-screen brightness with 1,000,000:1 contrast ratio. It’s ideal for producing High Dynamic Range (HDR) content with rich, deep black areas and accurate reproduction of bright peak highlights. Together with support for a much wider colour gamut than conventional monitors, the BVM-HX310 can reproduce high-resolution HDR images with images clarity, depth and realism.
As well as conventional 2.2, 2.4, 2.6, and CRT gamma, the BVM-HX310 supports standardized Electro-Optical Transfer Functions (EOTF) for HDR such as SMPTE ST.2084 and ITU-R BT.2100 (HLG). Both standards are used to meet the demands of today’s broadcast and cinematography industries. Additional EOTF tables for live and post production environments include 2.4 (HDR), S-Log2 (HDR), S-Log3 (HDR) and S-Log3 (Live HDR) – enabling easy workflows close to that of film while delivering 4K wide dynamic range.
Support for VPID (Video Payload ID) identifies EOTF, colour space and RGB source information embedded in the SDI signal. Monitor settings are adjusted automatically, cutting the risk of human error in pressured live production environments.
Easily check the effect of different LUTs while you’re on set or in post. Load customised User LUT (Look Up Table) files from a USB stick* for comparison during pre-grading or with a different EOTF. See the effect of different LUTs at the touch of a button.
*Note: BKM-17R controller is required.
Quad View Display mode allows instant comparison of up to four sets of custom display settings, including EOTF, Colour Space, Transfer Matrix and Colour Temperature, Contrast, Brightness and Chroma. It’s invaluable for comparing original footage with the look of different EOTF converted images. View up to four LUTs side-by-side in Quad View display mode.
Minimal processing delays are a critical factor in live production and broadcasting applications. With a processing delay of less than one video frame, the BVM-HX310 is ideally suited to the demands of real time video monitoring.
Interlace Display mode offers faithful reproduction of 1080i input signals, free from artefacts and picture degradation that can often occur during I/P conversion.
Anyone who’s used the BVM‑X300 master monitor will feel instantly at home with the familiar front control panel of the BVM-HX310. Seven user assignable function buttons are complemented by manual controls for aperture, chroma, brightness, and contrast. Usability is enhanced further with dimmable button lights and on/off switchable indicator lights.
The BVM-HX310 employs a software-based colour temperature (white balance) calibration function, which is called Monitor AutoWhiteAdjustment**. Combined with a PC and commercially available calibration tools***, this function enables simple adjustment of the monitor’s white balance.
* Supported with BVM-HX310
** Supported with Monitor AutoWhiteAdjustment V1.6
*** The Konica Minolta CA-410/CA-310/CA-210, Photo Research PR‑655/670, DK-Technologies PM5639/06, X-Rite i1 Pro/i1 Pro2, Klein K-10, Colorimetry Research CR-250 and JETI specbos 1211/spectraval 1501/ 1511.
Save time when you’re under pressure. The BVM-HX310 can retain settings last used in the status menu, including colour space, EOTF, User Preset and more. When the menu’s opened again, everything’s instantly available.
Two flexible shooting area markers can be set anywhere on screen. It’s useful for applications like shopping channels, where you need to differentiate clearly between views of the featured product and its buying information.
Multiple users can register their own password to access colour temperature and user preset data settings. This allows each user to correctly recall their own preset data, while keeping information safe from unauthorised use.
Key settings including last memory and user preset are loaded instantly when the monitor’s powered up. It’s a major time saver that’s invaluable for rental applications.
The BVM-HX310 can display various markers, including an aspect marker, safe area marker, and centre marker. In addition to this flexible selection of marker types, detailed display settings of each marker are offered. For example, the colour, brightness, horizontal/vertical position, and width of aspect markers can all be controlled, while the height and width of safe area markers can be adjusted.