SRP-X100 (SRPX100)

Compact audio mixer

Where to buy


For the productive perfectionist. Exceptional audio, time after time.
The Sony SRP-X100 Audio Mixer is designed for use in business and educational applications. A total of nine high quality input channels are provided, with flexible routing to the many and varied outputs. Contained in a compact, space saving 1U size body, the elegantly simple design of the SRP-X100 makes operation intuitive. Sony analogue audio technology provides excellent performance with extremely high quality audio signals and professional sound reproduction. The new Sony SRP-X100 enables you to achieve the highest of standards for the minimum cost and fuss, and you don't need to be an audio engineer to use it.
Compact Size
The SRP-X100 comes housed in a 1u box, enabling it to be used in environment where space is at a premium and quality cannot be spared.
Flexible interfacing
The varied inputs and outputs on the back of the SRP-X100 provide flexibility and connectivity with existing equipment for easy integration and compatibility.
On-board Phantom power
The SRP-X100 can provide (if necessary) +48v external power supply for condenser microphones - removing the problem of sourcing power for them.
High audio quality
Through using very high standard analogue componentry Sony have achieved very highly levels of audio quality and low noise. Providing clarity and perfect reproduction of source material.


Two mono mic channels (Channels 1 - 2)
+48 V phantom powering 100 Hz high-pass filter to reduce handling and wind noise XLR input connectors
Four mono channels, Mic/Line switchable (Channels 3 - 6)
+48 V phantom powering and 100 Hz high-pass filter in Mic mode XLR input connectors With Line Input mode selected, Channels 3 and 5 feed left outputs, 4 and 6 feed Right outputs
Three stereo line input channels (Channels 7 - 9)
Channel 9 configured to accept recorder output Phono input connectors
Wide, 30 dB headroom on mic inputs for simple, easy operation.
L/R Recorder bus output carries all inputs, except CH-9 stereo line input to avoid feedback
Master Land R outputs, switchable to mono outputs. XLR connectors
Two, mono Sub outputs
Separate switch
With the rear-panel Separate switch On, only Mic Bus signals are available from the Sub output and only the Stereo Line inputs are available from the Master outputs
Mounts in a 19-inch EIA standard rack, 1U high


Generic Specifications
Different input noise
IHF-A 150 (terminate):
Residual noise
Master Vol. 0 position: < 83dBu
General- SRP-X100
Power Requirements AC
120, 230 V Switchable 50/60 Hz
482 (W) x 44 (H) x 175 (D) mm (19 x 1 3 /4 x 7 inches)
2.6 kg
Signal Indicator
Green indicates at -20 dB of reference level
Storage Temperature
-20°C - +60°C
Operating Temperature
0°C - +40°C
Frequency response
5hz - 100 kHz, ref. 1kHz
+0.5/-2.0 dB
20 Hz - 20 kHz, ref. 1kHz
+0.5/-2.0 dB
Mono in master out 1kHz, -44dBu input
Stereo in Master out 1kHz, -10 dBu input
Cross Talk
1 kHz, between L-R outputs
< 70dB
1 kHz, between channel
< 70 dB
Channel volume attenuation
> 90dB

Resources and downloads