Uni-directional Condenser Microphone
Image of the following product: C-80


Uni-directional condenser microphone suitable for vocal/voice recording. Inheriting the microphone capsule used in the C-100 and using the same material as the C-800G for the diaphragm, this microphone inherits the essence of the predecessors. The dual diaphragm configuration suppresses sound characteristics changes with distance (proximity effect), enabling stable recording/distribution. "Noise Elimination Construction" succeeded from C-800G/C-100 prevents acoustic vibration resulting in low noise and clear sound.


Excellent Sound Quality

Powerful and rich mid-low frequency range provides vocals and voice recordings with a core sound and presence.

Dual Diaphragm Configuration

Dual diaphragm configuration realizes stable recording/distribution by suppressing sound characteristics changes with distance (proximity effect).

Noise Elimination Construction

Two-part metallic body structure succeeded from C-800G/C-100 microphone prevents acoustic vibration resulting in low noise and clear sound.

Low-Cut Filter

Low-Cut filter switch helps eliminate low-frequency nose and proximity effect.

Pad Switch

An -10dB pad switch on the microphone provides added headroom and minimizes distortion caused by transient peaks.


Audio Section
Capsule Type
Condenser Microphone
Frequency Response
Uni directional
Sensitivity *[1]
-30 dB
(deviation ±3 dB)
(0 dB=1 V/Pa, 1 kHz)
Output Impedance *[2]
90Ω±15%, Balanced
Dynamic Range
More than 125.5 dB
Signal-to-Noise Ratio *[3]
Inherent Noise *[4]
Less than 12.5 dB SPL
(0 dB=2 × 10-5 Pa)
(IEC* 61672-1 A-Weighted, 1 kHz, 1 Pa)
Maximum Input Sound Pressure Level *[5]
More than 138 dB SPL
(output level for 1% waveform distortion at 1 kHz, converted into equivalent input sound pressure level: 0 dB=2 × 10-5 Pa)
General Section
XLR-3-12C (male)
Mic Cable
XLR 3-pin Cable Required (Not Supplied)
Power Requirements
DC 44 to 52 V
Dimensions *[6]
Approx. 40 mm (1.57 in.) dia. × 158 mm (6.22 in.)
Approx. 215 g (7.6 oz)
Supplied Accessories
Cradle suspention (1)
Operating instructions (1)
Carrying case (1)
0 dB = 1 V/Pa, at 1 kHz
Output impedance at 1 kHz
A-weighted, 1 kHz, 1 Pa.
0dB SPL = 20μPa.
0 dB SPL = 20μPa.
The values for dimensions are approximate.

Register your product

Expert engineers, certified repairs and genuine spare parts – all at no extra cost. Try PrimeSupport today.