ECM-530 (ECM530)

High-quality uni-directional tabletop microphone

Contact usWhere to buy

Overview

Compact design and quality audio
The ECM-530 tabletop microphone offers a compact design, sleek finish and high-quality audio. It's ideal for use in lecture halls or conferences where quality projection is important, and it uses a flexible gooseneck design. The base is noise-isolated and the wiring is discreet.

The ECM-530 also uses 'AA' battery and Phantom Power operation.
High dynamic range and voice pick-up
The dynamic range and voice pick-up allow voices to be projected clearly in large halls, conferences or theatres.
Discreet size
The compact design of the ECM-530 allows it to sit discreetly on a surface, and the gooseneck can be manipulated in any direction.

Features

Phantom Power operation
This microphone uses Phantom Power to transmit both AC and DC power in one cable.

Specifications

Audio Section
Capsule Type
Electret Condenser
Frequency Response
70 Hz to 18 kHz
Directivity
Uni-directional
Sensitivity *[1]
-49.0 ±2.0(dB)
Output Impedance *[2]
150Ω±20%, Balanced
Dynamic Range
95 dB or more
Signal-to-Noise Ratio *[3]
63 dB or more
Inherent Noise *[4]
31dB SPL or less
Induction Noise From External Magnetic Field *[5]
5 dB SPL or less
Wind Noise *[6]
55 dB SPL
Maximum Input Sound Pressure Level *[7]
126 dB SPL
General Section
Connector
XLR-3-12C (male)
Mic Cable
3.28 feet
2 m
Power Requirements
Internal Battery: AA size
External DC: 14 V to 48 V
Dimensions *[8]
Stand base: o86 mm
Stand base: o3.5 inches
Mic: o12, extends 326 to 448 mm
Mic: o1/2 inches, extends 12 7/8 to 17 3/8 inches
Mass
Approx. 325 g
Approx. 11.5 oz
Supplied Accessories
Windscreen (1)
Operating instructions (1)
Notes
Note
*[1] 0 dB = 1 V/Pa, at 1 kHz
*[2] Output impedance at 1 kHz
*[3] A-weighted, 1 kHz, 1 Pa.
*[4] 0dB SPL = 20? Pa.
*[5] dB SPL/1E-7 T, 0 dB SPL = 20? Pa.
*[6] Wind noise at 2m/s (0 dB SPL = 20?Pa.)
*[7] 0 dB SPL = 20? Pa.
*[8] The values for dimensions are approximate.