Battery Station for Airpeak S1 drone
Image of the following product: LBN-H1


The LBN-H1 Battery Station is designed for professional drone operators flying Sony’s Airpeak S1 drone (1), from film sets to industrial applications. It provides convenient storage and transportation of up to ten Airpeak S1 battery packs (LBP-HS1), while providing intelligent and fast charging for eight battery packs (charging four at a time) and discharging up to eight batteries simultaneously for transporting or extended storage.


Enhanced Charging Capabilities

The LBN-H1 Battery Station includes built-in charging cables for two remote controllers (RCR-VH1) and equipped with three standard auxiliary power outlet accessory sockets that can support a variety of accessories, including 12V outlets that can charge mobile devices, cameras, and other USB accessories (2). The accessory socket cap can also be used as a stopper to prevent the lid from accidentally shutting due to wind or other factors while using this product.

Fast charging for efficient workflow

The pack includes two charging modes based on the operator’s needs. This include (QUICK) mode, for shorter charging time, which will charge up to four LBP-HS1 battery packs from 20% to 90% in approximately 30 minutes and (FULL) mode, which will charge up to four LBP-HS1 battery packs from 0% to 100% in approximately 55 minutes or from 20% to 100% in approximately 50 minutes. A built-in fan automatically cools the batteries.

Discharge mode for storage and air transportation

Up to eight battery packs can be discharged simultaneously whether the battery station power is on or off. (50%) mode can be used for long-term storage and will take approx. 17 hours to discharge from 100% to 50%. (25%) mode for air transportation will take approximately 27 hours to discharge from 100% to 25%.

Convenient and Durable

The Battery Station comes in a robust travel case with wheels and an extendable handle to conveniently transport up to ten battery packs.


Supported battery pack
Battery slot for charging/discharging
2 slots x 4 groups
Output rating for charging: Up to 42 V, 4 A
Remote controller (RCR-VH1) dedicated charging output
2 ports
14V per port, up to 2.6 A
Accessory socket output voltage
3 ports
12.7 V per port, up to 4.5 A
5 A total for 3 ports
Maximum power consumption
Body (Dimensions):
Approx. 21.8 x 16.7 x 10.2 inches (including projecting parts)
Power Cord (Dimensions):
Approx. 98.4 inch
Approx. 33 lb 8.2 oz (Not including battery pack, power cord, etc.)
Operating Temperature
32 - 104 ℉
Charging time
Supports 4-slot simultaneous charge
Battery pack LBP-HS1
FULL (from 0% to 100%): Approx. 55 minutes each
FULL (from 20% to 100%): Approx. 50 minutes each
QUICK (from 20% to 90%): Approx. 30 minutes each
Discharging time
Supports 8-slot simultaneous discharge
Battery pack LBP-HS1
50% (from 100% to 50%): Approx. 17 hours each
25% (from 100% to 25%): Approx. 27 hours each
What's in the box
Battery Station
Power code
Accessory socket cap
Operating Instructions
Operating a drone in the United States is subject to federal law and regulations. State and local ordinances may also apply to certain operations. When operating an aircraft, it is the remote pilot/operator's responsibility to always comply with applicable laws, regulations, and ordinances.
Commercially available chargers for auxiliary power outlet accessory sockets (cigarette lighter sockets) (12 V) are required. The accessory socket does not support outputs of 50 W or more.

Resources and downloads